山東三所新材料技術有限公司

1、 Site survey

現場勘測是建造和安裝仿木護欄之前的一個重要步驟，因為未來的工作將以此為基礎，作為建造和安裝的標準。在勘察現場，應注意觀察基礎結構、承重和現場施工及周邊建筑物。

The on-site survey is an important step before constructing and installing the imitation wooden guardrail, as future work will use it as a basis and as a standard for construction and installation. At the survey site, attention should be paid to observing the foundation structure, load-bearing capacity, on-site construction, and surrounding buildings.

二、材料檢測

2、 Material testing

檢查并檢查運輸?shù)绞┕がF(xiàn)場的木欄桿柱、分離柱和橫梁的構件是否變形，檢查運輸和堆放過程中的構件是否變形，并檢查仿木欄桿的外形尺寸是否有誤，并查看仿木護欄的外觀是否有裂痕等現象。

Inspect and inspect the components of wooden railing columns, separation columns, and crossbeams transported to the construction site for deformation, inspect the components during transportation and stacking for deformation, and inspect the overall dimensions of the imitation wooden railing for errors, as well as inspect the appearance of the imitation wooden railing for cracks and other phenomena.

三、技術交底

3、 Technical disclosure

總的原則是，施工方技術交底，按照合同所有者或甲方的要求，由黨的建設提出的組織計劃進行了較為全面和深入的溝通和交流。因此，業主或甲方的要求，充分體現在安裝施工，產品符合設計要求和一致性的影響終效果。根據技術測試的設計要求，檢查木欄桿基礎設施的要求，不符合要求的，責令整改。基礎可以由甲方來處理，施工負責技術測試。制作安裝基礎，基座應該保證的95％或更多的平坦度的產量，為柱或通過其它方便的方法安裝的嵌入式預成形的孔。

The general principle is that the technical disclosure of the construction party has been carried out in accordance with the requirements of the contract owner or party A, and the organizational plan proposed by the party building has been comprehensively and deeply communicated and communicated. Therefore, the requirements of the owner or party A are fully reflected in the installation and construction, and the impact of product compliance with design requirements and consistency on the final effect. According to the design requirements of technical testing, check the requirements of the wooden railing infrastructure. If it does not meet the requirements, order rectification. The foundation can be handled by Party A, and the construction is responsible for technical testing. The production of installation foundation and base should ensure a flatness of 95% or more, with embedded preformed holes installed for columns or other convenient methods.

四、施工組織

4、 Construction organization

施工過程中應注意的具體問題，由現場施工人員詳細講解，使每一名施工人員都熟悉，保證安裝的進度和效果。

The specific issues that should be paid attention to during the construction process will be explained in detail by the on-site construction personnel, so that every construction personnel is familiar with it and ensure the progress and effectiveness of installation.