山東三所新材料技術有限公司

為更大程度上的呵護充氣模型產品，請在開始安裝充氣之前，在地上預鋪一些舊的地毯，從而更大程度上的隔絕沙地或地面對充氣模型產品的磨損。

To provide greater care for the inflatable model product, please pre lay some old carpets on the ground before installing the inflatable model, in order to isolate the sand or ground from the wear and tear of the inflatable model product to a greater extent.

山東充氣模型產品充氣成型后，請勿斷電。風機進風口不得有雜物，以免卷入造成風機受損。經常檢查使用情況，風機有異常響動應立即停機查看原因，排除故障后方可使用。

Do not power off the Shandong inflatable model product after inflation molding. There should be no debris at the inlet of the fan to prevent it from getting entangled and causing damage to the fan. Regularly check the usage. If there is any abnormal noise in the fan, it should be stopped immediately to check the cause and troubleshoot before use.

在移動充氣模型產品的時候，切忌生拉硬拽充氣模型底部，為避免增加更多不必要的磨損，再移動充氣模型產品的時候，如果充氣模型太沉，可以多人一起抬起移動，或者將里面的沙袋拿出來，再移動產品。

When moving inflatable model products, it is important to avoid pulling or forcefully dragging the bottom of the inflatable model. To avoid unnecessary wear and tear, if the inflatable model is too heavy, multiple people can lift and move it together, or remove the sandbags inside before moving the product.

充氣模型容易撕拉，穩固性相對來說比較低。所以在遇到強風大雨的情況下，切勿充氣使用。充氣模型造型越大，受風及外在的影響也越大。高度10米以上充氣物，5級風以上切勿充放。

Inflatable models are easy to tear and have relatively low stability. So in the event of strong winds and heavy rain, do not inflate it for use. The larger the shape of the inflatable model, the greater the influence of wind and external factors. Inflatable objects with a height of more than 10 meters should not be inflated or placed under wind conditions of level 5 or above.

充氣模型屬于充氣產品，在使用充氣模型產品的時候，請遠離尖銳物品。充氣模型的穩固，也基本上是以沙袋為主，切忌使用其他尖銳的物品來替換。例如：石頭，鐵架等等。

Inflatable models belong to inflatable products. When using inflatable model products, please stay away from sharp objects. The stability of the inflatable model is mainly based on sandbags, and it is strictly prohibited to use other sharp objects for replacement. For example: stones, iron frames, etc.

充氣模型產品在長期擺放室外的情況下，切忌白天黑夜的長時間充氣。臨時收起充氣模型產品的時候，打開拉鏈蓋，讓充氣模型產品自行的放氣，切忌強制性的壓擠充氣模型產品以達到快速放氣的目的。

When inflatable model products are placed outdoors for a long time, it is important to avoid prolonged inflation during the day and night. When temporarily retracting the inflatable model product, open the zipper cover to allow the inflatable model product to deflate on its own. Do not forcefully squeeze the inflatable model product to achieve rapid deflation.

放氣結束后，請在充氣模型產品上壓蓋沙袋，同時確保龐大的充氣模型產品沒有刮蹭到路面或者其他圍欄等障礙物之上。更多相關內容就來我們網站http://www.dv556677.com咨詢了解吧！

After the deflation is completed, please cover the sandbag on the inflatable model product and ensure that the large inflatable model product does not scratch the road surface or other obstacles such as fences. For more related content, come to our website http://www.dv556677.com Consult and understand!